Videos

Tutorial: Working with the KrosFlo® KR2i | Chapter 1

Learn how TFF (Tangential Flow Filtration) is performed using the KrosFlo® KR2i TFF System. October 2019 | 2 minutes

Tutorial: Working with the KrosFlo® KR2i | Chapter 2: Major Components

Learn the major components of the KrosFlo® KR2i Tangential Flow Filtration (TFF) System. December 2019 | 2 minutes

Tutorial: Working with the KrosFlo® KR2i | Chapter 3: ProConnex Flow Paths

Learn how to combine the KrosFlo® KR2i TFF System with ProConnex® Flow Paths. December 2019 | 1 minute

Tutorial: Working with the KrosFlo® KR2i | Chapter 4: Set-up for C mode

Learn how to set up the KrosFlo® KR2i TFF System for Concentration (C) mode. January 2020 | 5 minutes

Tutorial: Working with the KrosFlo® KR2i | Chapter 5: Set-up for C/D mode

Learn how to set up the KrosFlo® KR2i TFF System for Concentration/Dialfiltration (C/D) mode. January 2020 | 2 minutes

Tutorial: Repligen XCell ATF® Single-use System Offline Wetting Procedure

Learn step-by-step wetting procedure of an XCell ATF® Single-use Device filter. 4 minutes

Tutorial: How to Install a Repligen Type A F10-Filter

Learn step-by-step installation of an F10 filter into a stainless steel XCell ATF® Device. 2 minutes

Tube-A-Lyzer Dialysis Device

Learn how the Tube-A-Lyzer® Device is ready to use with 6 molecular weight cut-offs (MWCOs) and 2 volume sizes. May 2019 | 2 minutes

Micro Float-A-Lyzer Dialysis Device

Learn how the Micro Float-A-Lyzer® Device is pre-assembled ready to use for easy and efficient laboratory dialysis of very small sample volumes. April 2019 | 2 minutes